CTAn history legend: * updated functionality + added functionality - bug fixes ± added/updated functionality (only for Version+) Version 1.11 ____________________________________________________________________________________________________ [1.11.8.0] + added in the <3D model> plug-in a selection between apply to , or . + added in the <3D model> plug-in an option for the algorithm. + added a of the Tb and Sp values in the <3D analysis> results table. [1.11.7.0] - fixed bug: the application hangs when one opens a single image with resizing and starts custom processing. + added the new command line key: /Ps - specifies the new pixel size in mm of image/dataset. + added in the dialog the button that allow to modify the pixel size of image/dataset. + the command saves images according of the options. - fixed bug: wrong z-position numbering inside roi-file when loaded a stack of resized binary images as ROIs. + added the checkbox to the plug-in. This option is avaliable only in the mode. [1.11.6.0] - fixed bug: in the CTAn the interpolation of ROI becames a dynamic just after ROI loading (this bug does not affect the BatMan). [1.11.5.1] - fixed bug: the program crashes at the save operations if the pathname of data contains the symbol '%'. [1.11.5.0] + added the export of 3D model to the ASCII STL-file [1.11.4.2] + added rotation of Image ROI. When mouse cursor is over the small circle at the right side of the bounding rectangle one can rightclick mouse to call context menu with command or left click and drag mouse to rotate shape. [1.11.4.1] * increased speed of the plug-in. * increased speed of the plug-in. * increased speed of the <3D analysis/Additional values/Number of objects> calculation. ± implemented multithreaded version of the (native and plug-in). + added a tooltip indication of the value of angle while the profile line is changing. + added a saving of state of following options: - ; - ; - ; - . + added rotation of profile line around his own centroid: SHIFT+'+' - clockwise rotation; SHIFT+'-' - counter clockwise rotation. When mouse cursor is over the begin/end of profile line one can rightclick mouse to call context menu with two commands and . [1.11.4.0] - fixed bug: the slightly overrates the value of porosity of several objects. [1.11.3.6] * changed the output of the plug-in * in the three options were set to default value and were hided: (On), (On), (Off). [1.11.3.5] - fixed issue: stl-file fails to load in the Cinema4D. [1.11.3.4] - fixed bug of v.1.11.3.3: zero length of postfix filename when one uses "Open with..." explorer command. [1.11.3.3] + added an option to the bar: the previous drawn line returns to the default vertical or horizontal line when doubleclicking the left mouse button on the image. + added intermediate levels between the power 2 values in the droplist. * fixed bug of v.1.11.3.2: division by zero + added the option that specifies the default number of digits in the postfix of filename. + added the <#> droplist in the dialog that allows to modify the length of the postfix of filename. Initial value of that control will taken from the preferences or from the command line. The command line has higher priority. The postfix length does not change till loading of new dataset. [1.11.3.2] + added the thresholding (2D/3D) to the plug-in. The output of plug-in is grayscale image with N+1 colors, where N is number of threshold levels. [1.11.3.1] * renamed command by in the menu. * removed menu item/tab from the menu/dialog. * the plotting of histogram updated according to the combination of state and active tab (/) of dialog . [1.11.3.0] + added the thresholding (2D/3D) to the plug-in. * the Otsu thresholding implemented for the command of the menu / toolbar. [1.11.2.0] + added and in the results text file of individual 2D/3D object analysis (CTAn native dialogs). [1.11.1.1] - fixed bug: the plug-in does not report two 2D parameters: and . [1.11.1.0] * changed SkyScan logo in the dialog. - fixed bug: wrong painting of image when the dialog is opened. - fixed bug in the dialog of <3D model> plug-in: when button is pressed the configuration does not restore its previous state. [1.11.0.0] - fixed bug of versions 1.10.10-12: sometimes the program crashes when clicked tab. Version 1.10 ____________________________________________________________________________________________________ [1.10.12.0] - fixed an issue of versions 1.10.2-11: in the BatMan the browsing of ROI files starts from wrong folder [1.10.11.0] * updated the plug-in: removed pre-smoothing option. It can be done with an internal plug-in. + added the checking an integrity of dataset. The nonregular image numbering in the dataset can be a reason of wrong calculations. [1.10.10.2] - fixed an issue of versions 1.10.5-10: the application hangs when a 3D model creation is started in mode. [1.10.10.1] + added the check-box on the dialog. This option enables/disables an addition of extra space around image when the is selected. + added the calculation (based on direct counting of pixels) of the 2D values to the window, command and <2D analysis> plug-in: - <*Object area>; - <*Total ROI area>; - <*Percent object area>; - <*Average object area>; - <*Average object equivalent circle diameter>; - <*Area of closed pores>; - <*Area of open pore space>; - <*Total area of pore space>; - <*Closed porosity (percent)>; - <*Open porosity (percent)>; - <*Total porosity (percent)>. + added the calculation (based on direct counting of pixels) of the 2D values to the of the command and <2D analysis> plug-in: - <*Total VOI volume>; - <*Object volume>; - <*Percent object volume>; - <*Mean total crossectional ROI area>; - <*Mean total crossectional object area>; - <*Average object area per slice>; - <*Average object equivalent circle diameter per slice>; - <*Closed porosity (percent)>. * impoved the - fixed bug of versions 1.10.2-10: the and report wrong results [1.10.10.0] ± implemented multithreaded version of the <3D analysis/Stereology> calculations + added the calculation (based on direct counting of voxels) of the <*Object volume>, <*Volume of pores>, <*Porosity> to the dialog and plug-in. [1.10.9.0] * increased speed of the <3D analysis/Additional values/Fractal dimension> calculation - fixed bug of versions 1.10.2-8: the Batch Manager does not open roi-files [1.10.8.0] - fixed bug: the plug-in and native versions of the sometimes report different values ± implemented multithreaded version of the plug-in (3D) ± implemented multithreaded version of the <3D analysis/Basic values> calculations ± implemented multithreaded version of the <3D analysis/Additional values/Structure model index> calculations ± implemented multithreaded version of the <3D analysis/Additional values/Number of objects,..,Euler number> calculations [1.10.7.0] - fixed bug of versions 1.10.5-6: the averaging of dataset in 3D causes the program crash * impoved the and functions in the plug-in (grayscale 2D) ± implemented multithreaded version of the plug-in (grayscale 2D/3D) ± implemented multithreaded version of the plug-in (grayscale 2D/3D) ± implemented multithreaded version of the plug-in (grayscale 2D/3D) ± implemented multithreaded version of the plug-in (grayscale 2D/3D) ± implemented multithreaded version of the plug-in (grayscale 2D) ± implemented multithreaded version of the plug-in (grayscale 2D) [1.10.6.0] - fixed small issue of popup warning window in the dialog ± implemented multithreaded version of the plug-in (2D/3D) ± implemented multithreaded version of the plug-in (2D/3D) ± implemented multithreaded version of the plug-in (2D/3D) [1.10.5.0] + the radius of and filters (the plug-in) accepts non-integer values ± implemented multithreaded version of the plug-in (2D/3D) ± implemented multithreaded version of the plug-in (2D/3D) ± implemented multithreaded version of the plug-in (2D/3D) ± implemented multithreaded version of the plug-in (2D/3D) ± implemented multithreaded version of the plug-in (2D/3D) [1.10.4.0] + added the 3D implementation of filter to the plug-in + added the elevation of privelege when it required - fixed an issue when program starts under the Guest user account [1.10.3.0] * the plug-in renamed to the + added the filter (2D version) in the plug-in. "... Typically three settings control digital unsharp masking: - Amount is listed as a percentage, and controls the magnitude of each overshoot (how much darker and how much lighter the edge borders become). This can also be thought of as how much contrast is added at the edges. It does not affect the width of the edge rims. - Radius affects the size of the edges to be enhanced or how wide the edge rims become, so a smaller radius enhances smaller-scale detail. Higher Radius values can cause halos at the edges, a detectable faint light rim around objects. Fine detail needs a smaller Radius. Radius and Amount interact; reducing one allows more of the other. - Threshold controls the minimum brightness change that will be sharpened or how far apart adjacent tonal values have to be before the filter does anything. This lack of action is important to prevent smooth areas from becoming speckled. The threshold setting can be used to sharpen more-pronounced edges, while leaving subtler edges untouched. Low values should sharpen more because fewer areas are excluded. Higher threshold values exclude areas of lower contrast." (http://en.wikipedia.org/wiki/Unsharp_masking) [1.10.2.0] + added a X/Y translation of VOI when the Left mouse button with the Ctrl key is pressed inside the fixed shape of ROI. + added new type of region of interest - an Image ROI. The Image ROI has a limitation: it should contain less than the 16K fragments. (Here the fragment is a continuous part of the image stripe). The Image ROI can be translated, resized and saved into the ROI file. + added the loading of VOI from the set of monochrome bitmap files. This option is available when one changes the type of the file to the on the dialog. + added two options on the dialog: - the
defines how should the loaded bitmaps are positioned; - the enables the resizing of loaded bitmaps according to their pixelsize. + added the command to the menu + added the check-box on the plug-in dialog - fixed the issue with building a cubic ROI [1.10.1.6] - fixed a bug of formatting output data: the "Number of voxels" in the output histogram can report negative value [1.10.1.5] + added the new command line key: /nNUM - number of digits in the postfix of the filename (default value is 4) - fixed an issue of the writing of png-images under the Windows 7 [1.10.1.4] + added a PNG-file format in the list of supported files * changed the mouse button commands for the volume rendering window: LEFT - zoomin/zoomout; LEFT+SHIFT - move clip plane; RIGHT - rotate all; RIGHT+CTRL - rolate clip cube; + added the reading of the 24-bit RGB tiff files - fixed an issue of the crushing of program when on the Sony Vaio with NVidia GeForce + added the calculation of SMI in the dialog and plug-in [1.10.1.3] + added the and operations in the plug-in + added the and operations (only 2D versions) in the plug-in. [1.10.1.2] * updated the drawing of a polygonal ROI (the dotted line closes a polygon shape). - fixed an issue: in several situations the dialog loads the dataset as a single file. + added a combo-box of MIL on the property page of the dialog. + added a check-box on the dialog. The number of averaged images in 3D can be less than the 2D resize factor and depends of the spacing between images. + added an information about resizing of images on the dialog. + added the new command line key: /v - use averaging in 3D (applicable only when the "/d" key ("resize by") is specified). * updated: the menu item and button in panel are available for all types of distribution and have his own independ configurations. + added a combobox on the dialog for the , and distributions. There are two options the "um" and the "pixel". * updated: when the default ROI type changed and there are not the edited ROIs the ROI shapes update immediately (before to apply the new default ROI one had to press the button). + added the radio buttons on the dialog. There are two options: the (the style of the previous versions of the CTAn ) or the ( the style similar to presented in the Dataviewer ). This options takes effect after the restart of program. [1.10.1.1] + added to the tool the tab that allows to delineate and measure areas with a freehand tool. + added the button and menu item in the preview window + added a button program shortcuts on the dialog. It will create/update the User Desktop or the User Start menu shortcus of the CTAn and BatMan. The shortcuts will be the different for the 32/64-bit versions of program. .................................................................................................... [1.10.1.0 Release] * fixed a bug of the version 1.10.0.5 [1.10.0.5] + added a combo-box on the property page of the dialog where one can choose the center or the left down point of image as the reference point of the scaling in the preview window * fixed an issue: the plug-in does not restore initial state of a grayscale/binary flag of the restored data * fixed an issue with volume renering on the ATI Mobility Radeon video card * improved the / in 3D space * improved the plug-in in 3D space * increased a speed of the binary in 3D space * increased a speed of the plug-in in 3D space [1.10.0.4] * increased a speed of the binary in 2D space * increased a speed of the plug-in in 2D space [1.10.0.3] * removed the command from the dialog and menu. + added a check box in the dialog + added a <3D space> mode in the plug-in + added a operation in the plug-in [1.10.0.2] - fixed bug: the crashes when a filename contains symbol '%' [1.10.0.1] + added the and the parameters at a "Summary 2D data" field of the <2D analysis> (native and plug-in) + added the command to the dialog and menu. It allows to save a single colored image which shown at the image preview window. [1.10.0.0] + added the tab at the dialog. This tab is visible only when a video adapter supports the OpenGL 2.0 and higher. At this tab can be specified the following options: - default preview at loading ( full volume or volume of interest ); - maximum dimension of the texture ( it depends of video adapter and fixed for demo and evaluation licenses at 128 ) Version 1.9 ____________________________________________________________________________________________________ [1.9.3.4] * in the registration dialog one item renamed from the "Registration code" to the "Product ID" [1.9.3.3] + added in the <3D analysis> dialog (native and plug-in) three new items: - ; - ; - . .................................................................................................... [1.9.3.2 Release (Update of 1.9.1.0)] * special build without the preview window. It's just the fix of bugs of the versions 1.9 [1.9.3.1] + added the new command line keys: /rROIPATHNAME - load a roi for dataset /tTASKPATHNAME - load a task file /lLISTPATHNAME - load a list of datasets (applicable only when the "/a" key is specified) /c - close the program when the calculation are finished (applicable only when the "/a" key is specified) /a - autostart the task routines /? - show the command line format [1.9.3.0] + added an command to the menu and toolbar - fixed an issue: rarely the window does not accept the plug-ins that can work on binary images and shows an error message: "Images must be black and white" - fixed a bug: the <3D analysis> plug-in saves the for TbTh and TbSp in the opposite sequence - fixed a bug: the <3D analysis> plug-in calculates wrong TbTh and TbSp when was selected the partial VOI and the flag is disabled. To fix this issue the following plug-ins were modified to proceed a dataset according a VOI restriction: - - - - - [1.9.2.9] + added a command to the menu and toolbar - removed a flickering of the listboxes [1.9.2.8] + added a command to the menu and toolbar * increased the speed of the volume color transfer function - fixed some small bugs + added new function in the preview: by the double clicking of the right mouse button one can toggle a zoom origin between the center and the left-bottom side of window [1.9.2.7] - fixed a bug: wrong size of images when used the command with an inverted ROI [1.9.2.6] - fixed a bug of versions 1.9.2.4-5: invalid HUTAG structure size [1.9.2.5] + added the popup menu [1.9.2.4] - fixed an issue: native jpeg resolution tag does not support a dpi > 65535 (~0.39um) and we add the proprietary tag - fixed an issue: the resampling of dataset produces files in the opposite sequence + added the preview vindow (avaliable only for video cards which support a hardware acceleration of Open GL) where one can: - rotate the volume and the clip box when the Left mouse button is pressed; - rotate only the clip box when the Left mouse button and the Ctrl key are pressed; - zoom the volume and the clip box when the Right mouse button is pressed: - the moving to center - Zoom out, - the moving from center - Zoom in; - select and move the clip plane when the Left mouse button and the Shift key is pressed. For the instance the volume cube dimesions are limited by 128x128x128 pixels. [1.9.2.3] - fixed a problem with a window position on the multi-monitor systems - fixed a bug of versions 1.9: at the start of program several options of did not applied to environment - added in the dialog a edit box [1.9.2.2] - fixed an issue with a drag-and-drop of the 16-bit TIFF-files [1.9.2.1] * disabled the SkyScan stamp checking from the TIFF-file loading [1.9.2.0] + added to the an option to use the global CTAn read-only or the local persist BatMan preferences + added to the tool the tab that allows to record a xyz positions of clicked points + added to the plug-in function the combobox where are specified the objects to be deleted + added: the dialog goes to the last visited tab in the program process instance + added a combobox to the dialog which sets the way of the calibration: HU->BMD or AC->BMD .................................................................................................... [1.9.1.0 Release] + added the export of 3D model to the binary PLY-file (tested with http://www.cyberware.com/products/software/plyview.html) [1.9.0.0] + added the loading of "old" versions of the task lists in the . The message box will appear when the wrong configuration of plug-in has been found and the status of the task item will be marked as "invalid configuration". Version 1.8 ____________________________________________________________________________________________________ [1.8.2.4] * the parameter of the renamed to the * the parameter of the renamed back to the (see v. 1.8.2.3) * the parameter of the <2D analysis> renamed to the * the parameter of the <2D analysis> renamed to the * updated the porosity calculation in the <3D analysis> and + added the to the <3D analysis> dialog (native and plug-in) + added the column to the dialog [1.8.2.3] - fixed: program does not read the raw data file as the single-volume when the filename postfix contains four digits - fixed: the moments of inertia about the axes X and Y were swapped + added the Principal moments of inertia (max and min) in the <2D analysis> and results (native and plug-in) * improved the calculation of an object orientation * the parameter of the renamed to the [1.8.2.2] - fixed the bug of v. 1.8.2.0-1: the function creates the single-volume raw data file with an inverted z-order of images [1.8.2.1] - fixed the bug of v. 1.8.2.0: wrong information saved in the raw data file header file when the ROI size has changed + added in the dialog the new data types: - unsigned short; - signed short; - unsigned long; - signed long; - float; - double. + added two new fields and in the dialog where one can cpecify the effective range of the imported raw data [1.8.2.0] + added the possibility to prevent the unwished shut down of computer when the batch processing is in progress + added the importing of raw data from the single-volume file or from the set of enumerated files (for the moment supported only the 8-bit data) + added the to the dialog where one can specify the type (extension of file) of raw data + added the in the plug-in and the dialog. The check box of those dialogs allows to choose the single-volume output raw data. + added the in the dialog where one can choose the default file extension of results data. [1.8.1.9] + added the button to the window + added the new parameters in the : - ; - . + added the new buttons and menu items to the toolbar and menu: - - the old style of interpolation - - the current style of interpolation - - (new!) the fusion of the previous two styles [1.8.1.8] * the two <2D analysis> items renamed: - from to - from to [1.8.1.7] + added the checkbox in the dialog + added the results of stereology analysis to the output of the <3D analysis> plug-in + added in the <2D analysis> dialog (native and plug-in) the new items: - ; - ; - ; - ; - ; - ; - . + added in the <3D analysis> dialog (native and plug-in) the new items: - ; - ; - ; - . - fixed the bug of versions 1.8.1.5-6: the incorrect displaying of a grayscale jpeg image when the conversion not used + implemented the fast toggle back to the view and fast reopen of the when the ROI, binary selection and z-position of image have not changed + implemented the fast reopen of the when the binary and VOI selection of image have not changed + added the new parameters in the : - ; - . [1.8.1.6] - fixed the bug of the version 1.8.1.5: program crashes when open the dialog in the mode [1.8.1.5] + added the item in the dialog wich select the way of converting of the color images to the grayscale .................................................................................................... [1.8.1.4 Release] - fixed the bug: when the datasets loaded had been reconstructed by steps other than step 1, the created MIP image (along profile) does not reflect the step intervals in Z direction and it is vertically compressed [1.8.1.3] * changed the symbol of 2d parameters : "Av.Obj.Le" -> "Av.Obj.Sz"; - fixed the bug: the program crashes while build the 3D-model by adaptive rendering with grayscale smoothing and binary selection started from zero [1.8.1.2] - fixed the bug: if the program pathname contains the space symbol the dialog with message "X:\XXXXXXX\XXXX contains an incorrect path" is shown while registration - fixed the bug of v. 1.8.1.1: wrong format of report line of <3D analysis> [1.8.1.1] + added in the <3D analysis> dialog (native and plug-in) three new items: - ; - ; - . - fixed the bug of versions 1.8.0.9 and 1.8.1.0: the item did not save state [1.8.1.0] + added the item in the summary results of <2D analysis>. It does not include the horizontal intersection surfaces [1.8.0.9] + added the plugin that contains , , , , and operations + added in the plug-in an item + added in the <3D analysis> plug-in the checkboxes for TbTh and TbSp * removed the operation from the plug-in. Use for that a operation of the plug-in. - fixed the "border" issue of 3D operations of plug-in when the is selected * added the item in the dialog where one can apply or notation to numbers - fixed the bug: the 64-bits version stops working when builds a huge 3D-model by [1.8.0.8] - fixed problem: the video-compression codec locks the avi-file in error case [1.8.0.7] + added in the view the moving of a profile line by the combination of and arrows keys + added in the view the moving of a ROI-shape by the arrows keys while the left mouse button is pressed inside ROI + added in the view the resizing of a ROI-shape by the arrows keys while the left mouse button is pressed inside a corner of ROI bounding rectangle [1.8.0.6] - fixed the bug: plug-in doesn't allow to change the item - fixed the bug: the doesn't accept the and properties + added in the the item. It doesn't affect to the plug-ins. [1.8.0.5] - fixed the problem of version 1.8.0.4: wrong drawing of polygon when delete the node. [1.8.0.4] - added the command in the menu and toolbar. It enables/disables an editing of the polygon nodes [1.8.0.3] - fixed the bugs of versions 1.8.0.0-2: - wrong report filename in several plug-ins; - small difference of SMI reported by CTan and BatMan [1.8.0.2] - fixed the bug of versions 1.8.0.0-1: wrong format of report line in the <3D analysis> [1.8.0.1] * improved the algorithm of the pores calculation in the [1.8.0.0] + added the check box in the plug-in + added the comand in the menu + added the configuration dialog for the plug-in with a 2D/3D space selection * updated the dialog Version 1.7 ____________________________________________________________________________________________________ [1.7.0.7] + added a stretching the profile line [1.7.0.6] + added the plug-in .................................................................................................... [1.7.0.5 Release] - fixed small bug of version 1.7.0.4 [1.7.0.4] * updated resizing mechanism of ROI's (very slow redrawing on some ATI videocards) [1.7.0.3] + added the shortcut for - fixed bug: wrong ROI-size when save full size images - fixed bug: wrong ROI-shapes when used the z-position slider while the ROI interpolation in progress - fixed the bugs in the stereology calculations (thanks to Peter Saparin) [1.7.0.2] [1.7.0.1] - intermediate builds of program for a test purpose only [1.7.0.0] * small cosmetic changements Version 1.6 ____________________________________________________________________________________________________ [1.6.1.3] + added the check box to the dialog + added support for jpeg files for 64-bit version of CTAn * increased ~ four times the speed of the filtration in the plug-in - fixed problem: tooltips blocks the real time refreshing of some actions( calculation, animation ... ) [1.6.1.2] ! the first 64-bit build + udded compability for Windows Vista !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ATTENTION to the users of Windows Vista!!! If you have installed the previous (less than 1.6.1.2) version of program under Vista, the new version of program will require the registration authentication. !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! + added html-help support + added a tool for measuring length of the freehand lines to the window and window. Press Shift+left button mouse to activate it. This tool is disabled for the while the ROI editing is active. + added the command to the menu and toolbar. This dialog activates the protractor, line or path tool (depends of selected tab) and allows to collect results and save them as text file. When this dialog is active the ROI editing is disabled. .................................................................................................... [1.6.1.1 Release] + added in the plug-in the selection of a calibration unit * in the text report of individual 2d analysis of objects the parameter symbols and units are the separate lines [1.6.1.0] + added the menu item in the menu of the - fixed: the color of the in the does not restore the grayed state after deactivation while batch processing in progress * in the dialog box it is allowed the number of image slices to be entered by text editing, not only by the spin button - fixed: wrong z-position of a model that created by the "Adaptive rendering" from partial VOI - fixed: shrink-wrap in 3d with stretch over holes removes the top and bottom slices [1.6.0.0 Prerelease] Version 1.5 ____________________________________________________________________________________________________ [1.5.1.12] + added the edit-box in the dialog. Note that the roi-file will be copied only when the rotation angle equal zero. [1.5.1.11] + added the dataset log-file copying in the , and + added the check box in the plug-in + added the commands () and () + added the check-box in the dialog [1.5.1.10] * changed the accelerators: 1. - (before it was ); 2. - (before it was <+>); 3. - (before it was <->); 4. Image - <+> (before it was ); 5. Image - <-> (before it was ); + added the edit mode when polygonal ROI is selected. One can change the position of shape nodes, remove selected node ( key) or insert the new one ( key). * changed the reaction to mouse input when polygonal ROI is selected: 1. Move a ROI when the left mouse button is pressed inside the shape and cursor is moved (before it was the ); 2. Start the free-hand ROI drawing when the is pressed and cursor is moved (before it was the left mouse button). + added: for all ROI shapes it's possible to cancel the drawing/moving/editing procedure and restore the previous shape state if one press the key before the release of left mouse button. - fixed bug: in the the dialog box always shows: "Demo version". + added: the call of the key will reset the Plolygonal ROI and assign it with its boundaries. + added the command to the ROI menu and toolbar. + added the keyboard accelerators: 1. - ; 2. - ; 3. - ; 4. - <*>; 5. - <=>; 6. - ; 7. - ; 8. - . + added the menu item in the ROI submenu (). + added the dialog that shows the actual keyboard shortcuts () [1.5.1.9] * updated the thickness measurement (sphere fitting) in the 3D analysis: the updated algorithm crosses the VOI boundary to prevent small spheres going into the corners, but takes more calculation time. + added the new type of ROI interpolation that will be the default. The previous one is obsolete but will applied when old roi-files is loaded until the button be pressed. The algorithm contains the fine interpolation of non-polygonal ROIs and a little bit more realistic polygonal interpolation. - fixed bug: the vertical flip of JPEG-images in the CTAn versions 1.5.1.(6,7,8) [1.5.1.8] + added the volume of objects inside each range of the thickness and separation distributions + added plug-in [1.5.1.7] + added a <3D space> mode in the plug-in - fixed bug: wrong model size when one create a 3D-model from the images with reduced size [1.5.1.6] + added the HU information tag in the JPEG-file + added an JPEG image format in the plug-in + added an JPEG image format in the dialog + added an JPEG image format in the dialog + added an JPEG image format in the dialog + added an JPEG image format in the dialog + added the in the dialog + added the in the plug-in dialog [1.5.1.5] - fixed bug in the <3D model> plug-in: wrong model when the image width is not multiple to four [1.5.1.4] + added a notification icon to the BatMan dialog that appears when the ROI does not loaded + added in the BatMan the buttons and to load and save a Dataset list [1.5.1.3] * the density histogram outputs the results text files in the comma-delineated format (it was tab delineated) + added an in the 2D results * fixed in the 2D analysis summary data the small diveation of Av.Obj.Ar. and Av.Obj.Le. The mean values of MMI(polar), Ecc, Tb.Pf and FD calculated by exclusion the slices with zero values. Another mean values calculated by using total number of slices. [1.5.1.2] - fixed bug: some 2D analysis summary data (BATMAN version) are WRONG when the VOI is partial [1.5.1.1] + added the moving of poligonal ROI (SHIFT+Left mouse button) + added in the ROI bar and menu two items: and . With this command one can copy any non interpolated ROI and paste it to any image + added the button in the bar [1.5.1.0] + added the button to the bar. [1.5.0.4] + added in the dialog the button that allow to modify the pixel size of dataset. [1.5.0.3] + added the and the items in the dialog * fixed: the wrong bottom palette colour when one change contrast and brightness [1.5.0.2] + the mouse wheel is disabled while drawing the ROI + added in the plug-in report the number of removed speckles [1.5.0.1] - fixed bug: wrong 3D model when one saves a small model in the p3g-format. (The afected models contain near 60000-130000 facets) .................................................................................................... [1.5.0.0 Release] + added to the summary of 2D analysis * in the <3D model> plug-in the unit is fixed to voxel for the P3G and CTM files Version 1.4 ____________________________________________________________________________________________________ [1.4.1.20] - fixed bug: self-closing of the application when in the dialog the "Desktop" folder is selected and mouse goes over an bmp-file [1.4.1.19] - fixed bug: crash when load some 16-bit tiff-files [1.4.1.18] * Changed the way (based on perimeter/surface of objects) of the 2D/3D farctal dimension calculation. [1.4.1.17] - fixed bug: the two new 3D functions ( and ) do not apply the ROI [1.4.1.16] - fixed small bugs [1.4.1.15] + added to the <3D analysis> [1.4.1.14] + added to the <3D analysis> [1.4.1.13] - fixed bug: incorrect report of TS and BS values in the summary of 2D analysis (non plug-in version). + added a item to report of 2D analysis [1.4.1.12] + added the menu item in the submenu and image context menu - fixed problem with the reported threshold levels in the 2D/3D analysis plug-ins [1.4.1.11] - fixed problem with naming convention of log-file [1.4.1.10] + added the indication of central point of rectangle, square, elliptic and round ROIs [1.4.1.9] + added a protractor tool to the window and window. Press Ctrl+left button mouse to activate it. Switching/releasing a Ctrl key when moving mouse, you can select an active side of the protractor + added a to the bar [1.4.1.8] * implemented a correct range for selected part of 16-bit TIF images + added a manual calibration of Attenuation in the bar [1.4.1.7] + added in the 3D analysis the calculation of the 3D-centroid + added in the summary of 2D analysis the coorinates of 3D-centroid + added in 2D analysis an item "Z position" + added the global threshold levels to the 2D/3D text report + in the plug-in added an mode + added the tab to the bar [1.4.1.6] * enabled a Kuwahara filter (2D/3D) in the plug-in [1.4.1.5] - fixed bug in : wrong bitmaps when the dataset images are not square - fixed bug in <3D-model> plug-in: a write error when a reduced dataset is opened * in , the default frame rate for both visualisation and avi is increased from 2 to 15 * in two selectable options are hided and and always are done by default + added plug-in to reload the dataset or ROI [1.4.1.4] + added 3D-filters in the plug-in + added in tif-file a support of x and y resolution denominators + added in the dialog a field + added a scrolling of image to center an object selected in the dialog, if the zoom factor of an image is less than 1 the image will be displayed in actual size + added in the the button to change a font for the user typed text [1.4.1.3] + 3D-transformations added in the plug-in * optimized the speed of the filtration in the plug-in [1.4.1.2] + added in the dialog a button - fixed problem: a plug-in can't create destination folder if the source folder contains a dot (".") symbol [1.4.1.1] + added in the dialog buttons ,,, and edit box . - fixed problem with small ROI shifting in some datasets [1.4.1.0] - fixed bug: self-closing program when one browses for dataset - fixed problem with calculation some parameters of non Skyscan images with zero pixel size ( zero resolution is forced to 96 dpi ) + added preservation of a condition of the dialog - fixed bug: crashing when open a single image for 3D analysis + added in the dialog a button that open a dialog with the same name where one can select the details to display for the results. + added in the dialog a check box . (This option requires the registration authentication under administrative account). * removed rendring from dialog and <3D-model> plug-in dialog to avoid Marching Cubes rendering - fixed bug in plug-in: incorrect shrink-wrapping when the check box is selected + added in the bar two edit boxes which allow to change of the thresholds by text editing + added two buttons and menu items in the bar and menu. There are the and the + added an item to plug-in dialog and a despeckle implementation for ROI + added a 3D version of the despeckle operations in the plug-in !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ATTENTION !!! After one starts once this or next versions of program the start of the older versions (less than 1.4.1.0) will require the registration authentication. To keep working the Ant-application one must update it to version 2.4.2.0 or high !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! [1.4.0.1] - fixed: a P3G model origin is always centred, an unit is voxel .................................................................................................... [1.4.0.0 Release] - fixed small bugs of the versions [1.3.3.10] and [1.3.3.11] Version 1.3 ____________________________________________________________________________________________________ [1.3.3.11] + added , and in the summary of 2D analysis + added in the 2D image analysis [1.3.3.10] - fixed problem: when one changes view mode the scroll position of image is changed [1.3.3.9] - fixed incorrect marker position of object when the image origin is in the center of image [1.3.3.8] - fixed bug in the function of the plug-in [1.3.3.7] + added possibility to the plug-in - fixed "border effect" in the transformation of the plug-in + added in the an option for the default orientation of the profile line - fixed problem with printing by the Adobe PDF-Writer - fixed bug in 2D analysis: in some datasets there is wrong calculation of some object parametes + added an item in context menu when one presses the right mouse button in the object + added a marker which shows an object (centroid) position of the selected item of the + added and commands in the dialog + added the item in the + added the buton in the main toolbar and item of the submenu + added accelerators (go to the top of the selection), (go to the bottom of the selection), (go to the selection reference) and (set the selection reference) + when one loads a ROI in the the dialog starts in the folder of dataset [1.3.3.6] - fixed a problem with updating of input controls of when press button - fixed incorrect auto ROI-file creating when + added plug-in + added the mode in the plug-in + added the mode in the plug-in [1.3.3.5] - fixed problem with color picker in the dialog [1.3.3.4] - fixed bug in : crash with big images [1.3.3.3] + added the colour picker to the dialog + added the / selector in the dialog [1.3.3.2] + added the three buttons (//) in the bar * redisigned the plug-in dialog + added the area selector (/) for operation in the plug-in + added the command in the plug-in + added the command in the plug-in + added the command in the plug-in + added the command in the plug-in + added the command in the plug-in + added the command in the plug-in: find largest connected binarised object and delete all other objects [1.3.3.1] + added menu item and tab in panel + added menu item and button in panel to save histograms of distribution in line-by-line text file (with comma delimiter) + added menu item and button in panel to display absolute values of histogram entries (# or area) + added menu item and button in panel (only for ) + added , and columns in 2D individual analysis + added column in 2D individual analysis + added ROI transformations to plug-in + added the CR to the end of results line when the <2D analysis> plug-in writes a single line-by-line text file * 3D parameter calculations are preset to 33 marching cubes method * increased the number of dicimal places to 3 for mean value of whole spectrum in the + added and to Summary 2D analysis - fixed problem with the recognition of the inverted ROI * increased the number of dicimal places to 5 for all parameters of the 2D and 3D reports - fixed "empty data" problem in <3D analysis> plug-in - fixed problem with the TBPF [1.3.3.0] - fixed small bug in <3D model> plug-in + added information about 3D surface algorithm in the summary and the line-by-line reports of 3D analysis + added a menu item in menu [1.3.2.11] + added in <2D analysis> plug-in a possibility to write Summary results of 2D analysis to specified line-by-line file + added the volume an surface calculation based on Marching Cubes 33 algorithm (for 3D analysis plug-in as well as for CTAn) + added the volume an surface calculation algorithm selection (MC or MC33) to and <3D analysis> dialogs + added the button that inverts all regions of interest * enabled button when load ROI. When one press this button all ROIs will be reset to default state [1.3.2.10] + added in 3d thickness/separation data report a column with a single value representing the midpoint of thickness range + added algorithm witch resolves ambiguous situations of MC. + added in button to shut down computer when all datasets will be processed [1.3.2.9] - fixed bug: <3D model> plug-in writes STL & CTM upside down models + added p3g-format support to <3D model> plug-in and command [1.3.2.8] * dialog goes directly to tab when reference level exists - fixed bug: when press ESC or ENTER button a contents of active bar disappears + added checked state for button - fixed palette problem when save new file. From now the new file will be saved with original palette. - fixed bug: ctm-model has no some facets at the border side of images - fixed bug: redundant facets in stl-model when applied the Double-Time cubes algorithm + added in <3D analysis> plug-in a possibility to save single text line & text table at the same time + added internal <3D model> creator plug-in with MC, DTC and ANT-like algorithms * in the dialog box for saving a new ROI dataset the message at the bottom from "fill outside space with white colour" was changed to "..with ambient colour". [1.3.2.7] + added in a button that open a BMD density calibration dialog [1.3.2.6] - fixed small bugs + added a line-by-line file selection for <3D-analysis> plug-in [1.3.2.5] - fixed bug: wrong stereology when the ROI is selected [1.3.2.4] - fixed bug: wrong MIL calculation when flag is off [1.3.2.3] - fixed problem with jumping of selected item when Up/Down buttons are pressed - fixed stereology problem - fixed problem: default thresholding levels can self-change while batch-processing * removed from 2D and 3D analysis plug-ins report about thresholding + added an item in dialog + added the reference indication icon. If dataset has not reference a selected item will be taken as reference in . If one does select range of images from tab of or change it manually from selection sliders the reference will be removed from dataset. * removed the button from . + added ROI filename in report file + added dialog for <2D analysis> plug-in to modify report style + added progress bar for individual tasks in - fixed bug: button in sometimes do not shows the right information + added "Crossectional thickness" in the summary data for 2d line-by line analysis + added support of the registration password that will be supplied with new lic-files (disabled!) * evaluation version limits the number of datasets for processing in batch mode - fixed problem with the saving of dataset (binary, resampled and images from roi) with the same prefix name to another folder [1.3.2.2] - fixed an unexpected dataset reload when change a view mode * some small cosmetic changements in results layout [1.3.2.1] + added in submenu a command that opens dialog for VOI selection + added in dialog the button to apply the selection without a dialog closing + added the tab to the dialog to apply a reference selection + added the menu item in a context menu of the bar to apply a reference selection .................................................................................................... [1.3.2.0 Release] * small cosmetic changements [1.3.1.9] - fixed bug: crashes when calls some not existing now resources * when in or output/report files locked by enother programs (like MS Excel), program tryes to create enumerated files like dataset(1).ctan.txt and if it's not possible (protected folder or CD-drive) writes these files in "My Documents/CTAn" folder. The same rules works for Save plug-in. [1.3.1.8] + added Tb.N(rod) and Tb.Sp(rod) calculations and changed correction factors for Tb.Th (2/bs/bv) and Tb.Dm (4/bs/bv) [1.3.1.7] * in 2D results updated a mean area, added a mean size and a mean porosity * to indicate an equator ROI in a cube and sphere VOI all ROIs except for equator change its type (cube->rectangle,round->ellipse) - fixed bug: wrong a total object surface in Summary 2D data * removed 3D surface area factor ( see comments for version [1.2.22.0] ) - fixed bug: crashing when export to avi a 24-bit bitmap + implemented Nomenclature selection in - fixed bug: 3D plugin in dialog (non batch) mode takes original images (not from previous plug-in) - fixed bug: not reloads ROIs after they were changed - fixed bug: sometimes disables the button when a dataset was changed - fixed bug: when a volume of objects = 0 the 3D calculation stops * writes report and results file called prefix.ctan.log and prefix.ctan.txt, * writes report and results file called prefix.batman.log and prefix.batman.txt [1.3.1.6] - fixed bug: CTAn falls after a 3D-model creation and CTVol starting + added a visualisation of resampled area and an indication of image position inside this area * CTM-file has a centred model with pixel unit - Histogram menu is extended by commands whitch was accesible bofore only from buttons from Histogram bar - fixed bug: saves wrong palette * a text file with histogram has new column - fixed some small problems with visualisaton [1.3.1.5] * updated saving thresholded binary images (old files with the same prefix-name were not removed before writing new files) + implemented image reslicing and saving new dataset to disk + implemented DA calculations based on model surface (but it is disabled at moment) + in the dialog when a mouse cursor goes over very long pathname the tooltip appears [1.3.1.4] * the button is enabled only for size distribution histogram + implemented Double-Time Cubes rendering algorithm () which produces two time less facets but with loss of an exactitude of evaluations. For this reason the volume calculations continue to be carried out on Marching Cubes algorithm + there is an possibility to choose adaptive (in um) or fixed (in pixels) line spacing for MIL/DA calculations in dialog [1.3.1.3] + implemented an image caching to speedup read operations (requires an extra disk space) [1.3.1.2] + implemented DA calculations inside sphere circumscribed around a ROI/VOI * !!! for the moment line spacing in DA calculations fixed in 5 pixels [1.3.1.1] + implemented DA calculations inside bounded ROI/VOI cube [1.3.1.0] + possibility to open an autosaved report file in 3D-analysis by pressing the information icon * plug-in renamed to + added to plug-in median, uniform (mean) and Kuwahara smoothings - fixed problem with size adjustment of docked panels * MIL/anisotropy analysis returned to original method of a sphere enclosing the whole selected ROI + added a stereology analysis report only in main program (this functionality must be activated) .................................................................................................... [1.3.0.5 Release] - fixed bug: diagonal distortion of images in a plugin of morphological operations [1.3.0.4] + selection of the new added dataset in BatMan - fixed bug: the results of 2d-analysis plugin had the reverse order of image numbers - fixed bug: incorect (sometimes) calculating of Mean trabecular pattern factor [1.3.0.3] - fixed image align problem in internal plug-ins [1.3.0.2] * removed unused options from - fixed bug in BMD preview + added BMD calibration in + implemented binary images support + added a checking of single plug-in before execution - fixed some small problems with reading TIF-files + added Hounsfield density range calibration in window [1.3.0.1] * removed tab and added fast density unit switching in Histogram window + added accelerators for dataset tabs: Alt+1 - Raw images Alt+2 - Regions of interest Alt+3 - Binary images Alt+4 - Processed images Alt+5 - Custom processing + added possibility to copy shadow projection, when save new dataset from ROI + added a checking of plug-ins task queue before execution [1.3.0.0] + added plug-ins managment + added batch processing + added selection frame rate for visualization and video-export functions - fixed bug: wrong CTM-model position + CTM and STL files have model unit taken from program preferences + added possibility to autosave ROI, when save new dataset from ROI (position of new ROIs depends of new size of images) + added a selection of intencity range from 16-bits TIF-files + added support for new BMP and TIF formats, contained HU-information + added in histogram window more statistics about grey/HU values of all selected voxels: total number of voxels, standard deviation, standard error of mean, 95% confidence limits (minimum and maximum) + added build-in plug-in + added build-in plug-in + added build-in <2D analysis> plug-in + added build-in <3D analysis> plug-in + added build-in plug-in + added build-in plug-in + added build-in plug-in Version 1.2 ___________________________________________________________________________________________________ [1.2.35.3] - fixed bug when evaluation key does not work under subversions of program [1.2.35.2] + added in prefereces the possibility of a choice: resize or not images when save new dataset from ROI [1.2.35.1] - fixed problem when program not started under non-administrative profile [1.2.35.0 Release] + added a calculation of Summary 2D data when save results of 2D analysis - fixed problem with permanent recalculation of histograms when after ROI modification one changes VOI selection - fixed bug in version 1.2.34 with incorrect loading ROI from file [1.2.34.0] + implemented Demo, Evaluation and Full execution mode [1.2.33.0] + the WHEEL or UP / DOWN keys change position inside dataset + the WHEEL + SHIFT or LEFT / RIGHT keys zoom an image + all sliders change his own position by one line when used mouse wheel - fixed bug: incorrect interpolation when an empty region drawn on next slice after nonempty ROI - fixed bug inside the dialog + added a calculation of histogram average value from selected threshold levels + added a showing histogram values in preffered units * all opening / saving operations don't change default dataset directory - fixed bug: a ROI area was calculated by the different algorithm that an image area + added possibility to build a cubic/sherical volume of interest from a square/circle ROI taken as equator shape. This action also changes the volume of interest selection according figure dimension. * corrected a total porosity calculation in <2D image analysis>: the pores inside selected oblect but outside of ROI are ignored - fixed bug: sometimes the ROI loses his position inside dataset [1.2.32.0] * new expiration time ( 15 october of 2003 ) + added in and <3D analysis> a possibility to save results as HTML-file + added indication of the start point of profile line + possibility to start / stop play images by pressing SPACE button + possibility to change the play direction by pressing TAB button + possibility to return at the last edited ROI by pressing BACKSPACE button - fixed incorect ROI-file loading [1.2.31.0] * new expiration time ( 1 october of 2003 ) * some fixes of calculation moments of inertia in + added in calculation of porosity + added in 2D image analysis calculation of: - moments of inertia XX and YY (about centroid of image); - polar moment of inertia (about centroid of image); - product of inertia (about centroid of image); - porosity - orientation - eccentricity + added in <2D image analysis> a Porosity distribution histogram + added indication of VOI when projection image is selected in the print layout + added in indication of VOI selection in custom units + added possibility to auto save 3D analysis results + added in ROI-file information about VOI and binary selection [1.2.30.0] + added in calculation of: - moments of inertia XX and YY (about centroid of object); - polar moment of inertia (about centroid of object); - product of inertia (about centroid of object). + added a calculation of image centroid in 2D image analysis + added a 2 pixel thick extra border around the ROI dataset in or - fixed bug: program crashed when opens and it has not enough disk space [1.2.29.0] + added warning when overwrite an existing dataset from ROI + added warning when overwrite an existing dataset from binary selection * removed warning "Do you want to replace file?" when check box is selected + writes images only from + writes images only from maximal ROI bounding rectangle inside VOI + added histogram preview in Hounsfield Units whitch defined in ..._cfg.txt and ..._rec.txt - fixed bug in extent calculation [1.2.28.0] - fixed bug: default ROI is always square after reset ROI - fixed bug: wrong shear image when cuted rarefied dataset * items inside list box does not scrolled while play dataset and just after the stop it scrolls to be sure that selected item is visible [1.2.27.1] * ranges of thickness shifted down by pixel [1.2.27.0] + jumping between edited ROI levels by pressing <+>/<-> * renamed check box in ("solid colour" changed by "white colour") * smaler increments for logarithmic histogram curve * removed excess spaces between items in 2D text report * the reference of selected image always visible in dataset window - fixed bug: extra lines in view menu * implemented canceling open dataset operation + display ROI dimensions in status bar + coloured icons for ROI - fixed bug: not stored pixel size in Y-dimension * new version of thickness calculation [1.2.26.0] + recoded DA calculations [1.2.25.0] + possibility to edit path of 3D-visualisation program + added full path item in properties dialog + added pixel size in 2D and 3D results + reset ROI command is added + logarithm histogram scale [1.2.24.0] * corrected version of trabecular thickness calculation + added expiration time ( 1 september of 2003 ) [1.2.23.0] + added to preview image colour profile + added dialog in to cut model inside selected VOI by profile line and save result image to bmp-file + added possibilty to fill outside ROI space with solid colour when save ROI selection as new dataset [1.2.22.0] * surface area multiplied by 0.95 * removed empty lines from text file output * show BA/TA and BV/TV as "percent value" [1.2.21.0] - fixed bug: sometimes buttons in are hidden - flicking screen while load ROI from file is avoid [1.2.20.0] - fixed incorrect font size displaying in dialog + added Skyscan/custom logo in dialog + page header with program version is added in dialog - bug in STL file export function is fixed - bug in SMI calculation is fixed + export model to CTM file with smoothed normals is added + two levels of model resolution is implemented in CTM file + implemented canceling 3D model creation + default filename to save 2D slice-by-slice data is ending by _2D.txt - fixed bug: if images has depth else than 8-bits AVI-export didn't work + new command in <3D analysis> dialog allow to save results line by line + added item in dialog [1.2.19.0] - fixed bug: program crashes when droping file to shortcut + added print layout dialog. It is optimized for page size less than 350x350 mm ( else it will be drawing problem ). * changed output order 3D results + added DA calculation by two ways: max_eigenvalue / min_eigenvalue and ( 1 - min_eigenvalue / max_eigenvalue ) * output eugenvalues normalized by 1.0 [1.2.18.0] + implemented canceling accumulative histogram calculation + measuring distances in image and projection * some modifications in user interface: - renamed to and placed in submenu ; - menu item moved to dialog; - ROI type buttons organised like one drop down button; - fixed painting problems during tooltips movement [1.2.17.0] - fixed incorrect showing some controls under non XP-style desktop themes * shade color is changed in projection image view + real time displaying during modification of ROI dimensions ( bounding rectangle ) or position ( offset ) + movie saving with or without compression by installed codecs - fixed bug: wrong drawing position of poligonal ROI in scrolling window * VOI dialog has in input Z-positions [1.2.16.0] + implemented displaying ROI bounding rectangle * ROI box does not shrink after single mouse click on image + image background color corresponds to state of selection + square and round ROI are added + histogram saving as text file is added + show selections in rulers [1.2.15.0] * new look of ROI preview when displaying binarised dataset + saving a new dataset from VOI+ROI selection as grayscale bmp-files is added + added tabs for fast switching distribution histograms * changed look of distribution histograms + scales for distribution histograms is added + scales for shadow projection is added - fixed bug of virtual memory usage + added tabs for fast switching grey levels histograms + scales for grey levels histograms is added + implemented image selection from shadow projection window + measurements in shadow projection are added [1.2.14.0] - fixed bug in MIL calculation + SMI calculation is added + the VOI selection dialog is added + histogram average value calculation is added + columns with pixel size and image size are added in raw images preview - fixed bug in TBPf calculations + implemented ROI preview when displaying binarised dataset + Extent calculation is added in + Eccentricity calculation is added in [1.2.13.0] + the Euler number is added in total and individual 2D analysis [1.2.12.0] + the preliminary version of MIL calculations is added [1.2.11.0] + trabecular number (Tb.N.) and percent plate (P.Pl) calculation are added in 3D analysis * the choice of a grid for morphological operations is removed from options * thickness calculations are more precise - fixed bug: wrong original palette preview * main window doesn't hide in calculation time + and <3D analysis> buttons are added in toolbar [1.2.10.0] * small corrections in output forms like: ROI->VOI, Total Volume->Volume of objects + the choice of a grid for morphological operations and evaluations based on them is added + indication of cursor position + adaptive parameter display precision [1.2.9.0] + unit and origin choice possibility - some found bugs in thickness calculation fixed + speedup thickness calculation ( depends from ROI ) [1.2.8.0] * origin of 3D model shifted to position: size_of_x/2, size_of_y/2, 0 + command line for 3D Visualization program has flag with pixel size in um: -p20.5 + possibility to create 3D model from resampled images with original dimensions [1.2.7.0] * histogram recalculation applies only in accumulative (from selection or from dataset) modes * animation shows images in selection range - fixed bug: sometimes in interpolated regions there are small holes + possibility to launch 3D Visualization software from specified path [1.2.6.0] + possibility to interrupt 3D calculations * memory usage reduced in thickness calculation [1.2.5.0] + new XP-style look (only under Windows XP) - fixed potential memory leaks in & <3D analysis> dialogs ( stream class changed by stream i/o rutines ); - fixed bug: reenter to dialog does not refresh all information; * from now dialog writes files from selected images; * writing results of 2D calculations from selected images to file ( dialog) [1.2.4.0] + progress indication to dialog; + two-directional sorting to dialog; + deletion data from selection to dialog; * removed Hasp-key support